Hola!
Tengo un problema muy similar con mi seat del 2004. Pues no se apaga la luz del testigo del airbag.
He comprado un cable OBDII que trae su wag com 409.1. Y lo he probado a conectar con el coche. Al entrar en el módulo de airbag me aparece una pantalla de advertencia que dice:
"Airbag Controller with the part number 6Q0-909-605-A found in some model year 2000 and 2001 VW/Seat/Skoda Golf/Jetta/Bora/Beetle class cars may be incompatible with VAG-COM!
It is possible to damage these Airbag Controllers simply by scanning them!
If this car is one of the ones mentioned above it is essential that you check the part number on the Airbag Controller before scanning it. More information can be found on the following web page:
www.Ross-Tech.com/vag-com/vw_issues.html
Do you want to proceed?
SI NO"
Tras pulsar si. Pues mi coche es un seat cordoba del 2004, me aparece una ventana sin opción a ninguna sección ni nada. Que se titula: "WAG-COM: Airbag Connection" y dice lo siguiente:
VAG-COM has already tried to connect to your Airbag Controller --but didn't succeed.
In order to avoid potential problems with the Airbag Controller, you MUST turn the ignition OFF now. Please do not turn it back ON until prompted.
En el que el único botón que existe en la ventana dice: "OK, the ignition is OFF"
Pero al pulsar el botón continúa apareciendo el testigo de luz del airbag en el cuadro de luces del coche.
He intentado localizar los errores. Que según el wag-com "Fault codes", aparece la siguiente información:
VAG Number: 6Q0-909-605-AD Component: 02 AIRBAG VW5 0010
Fault codes
2 Faults Found:
00532 - Supply Voltage B+
07-10 - Signal too Low - Intermittent
65535 - Shareware Version. To Decode all DTCs
00-00 - Please Register/Activate
Incluso borrando ("Clear Codes - 05") los errores, pulsando el botón (antes mencionado), continúa encendido el testigo del airbag en el cuadro de luces del coche.
Podríais echarme una mano?
Bookmarks